Does the arrangement of the acoustic panel affect the acoustics?

The arrangement of the sound-absorbing panel does significantly affect the acoustics of the room. Its location, quantity and installation mode will have an impact on sound absorption performance, especially when dealing with medium and high frequency noise and avoiding echoes. Here are some key factors:

1.Layout and distribution of wooden slat wall panels

Uniform distribution vs. local arrangement: 

felt acoustic panels  is evenly distributed so that the sound wave reflection in the entire space is evenly absorbed, reducing the interference of echoes and reflected waves. 

But in some cases, it may be more effective to place sound-absorbing panels locally (such as only in key locations such as corners, ceilings, etc.), especially when dealing with noise of a specific frequency or direction

The arrangement of key positions: 

The polyester fiber acoustic panels should be prioritized in the area where the reflected sound is strongest, such as walls and ceilings, especially the first reflection point, because this is the first place where the sound arrives and produces reflection. 

Proper arrangement of sound-absorbing board can effectively reduce the reflected sound and improve the sound quality of the space

2. Number and area coverage of sound absorbing panels

Coverage area: The number and coverage area of the pet acoustic panel directly affect the sound absorption effect. 

Generally speaking, a larger coverage area can absorb more sound, but if the sound absorption board is too much, it will cause the sound in the space to be too dry (lack of natural echo), affecting the richness of the sound quality

Moderate sound absorption:

 In order to avoid the sound is too dull or "dead corner" effect, it is usually recommended to use a sound absorption board to cover part of the area, retain the appropriate hard reflective surface, so that the sound in the space can be controlled and maintain a natural echo

2.Installation Angle of polyester acoustic panels

Right Angle vs. Tilt mounting: The mounting Angle of the sound proofing acoustic panel also affects the sound-absorbing performance. 

Right-angle installation will reduce the absorption of low-frequency noise, and through the appropriate tilt or curved layout, you can better absorb and diffuse low-frequency sound

4. Processing of different frequencies of sound

High frequency vs. Low frequency: The arrangement of the acoustic panel has different effects on different frequencies of sound. 

High frequency sounds (such as sharp echoes) are usually absorbed by the sound-absorbing panel near the sound source or reflection point, 

while low frequency sounds (such as low hum) often need to be processed by adding more sound-absorbing material to the corners or back of the room

Sum up

The arrangement of acoustic wall panel is very important for the optimization of acoustic effect. 

The correct position, coverage area and mounting Angle of the sound-absorbing panel can effectively reduce echoes and improve sound quality, while avoiding excessive sound absorption. 

Reasonable layout can not only provide the ideal acoustic environment, but also maintain the beauty and functionality of the space.