How to install ceiling acoustic panel?

Installing a ceiling acoustic panel usually involves the following steps:

1. Preparation: Make sure the ceiling surface is clean and flat. Measure the dimensions of the ceiling and determine the layout of the felt acoustic panel.

   
   

2. Select mounting method: The acoustic ceiling panel can be fixed by glue, hanger or nail. Choosing the right mounting method depends on the type of sound-absorbing board and your requirements for decorative effects.

3. Mark the position: Use a tape measure and pencil to mark the position of the pet acoustic panel on the ceiling. Make sure the marking lines are level and aligned to ensure a neat effect after the sound-absorbing panel is installed.

4. Glue installation: Apply an appropriate amount of construction glue to the back of the soundboard, then press the acoustic pet panels to the ceiling and hold it for a few seconds until the glue has dried.

5. Hanger installation: After installing the hanger or support strip, insert the sound absorbing board into the hanger or fix it on the support strip.

6.Nail installation: Fix the acoustic panels to the ceiling with nails or screws of the appropriate length. Make sure the nails are evenly distributed and do not affect the sound absorption.

7.Check and adjust: After the installation is complete, check whether the sound panel acoustic board is firm, ensure that all plates are horizontal, and adjust if necessary.

Ensure that you follow the installation instructions and precautions provided by the manufacturer.